If you are experiencing the PS4 NAT type failed issue, don’t worry – you’re not alone. This is a common problem that many PS4 users experience. In this blog post, we will walk you through some of the most common fixes for this issue.
We will also provide some helpful tips to get your NAT type working properly again. Keep reading for more information!
What is PS4 NAT type?
Before we jump into the solutions, it’s important to understand what NAT type is and how it affects your gaming experience. NAT stands for Network Address Translation and it controls how your console connects to other players online.
It also determines which ports are open or closed between you and other players. If your NAT type is not set correctly, you may experience lag and other connection issues.
4 Fixes for PS4 NAT type failed Issue
1. Change the MTU settings on your router:
On your router, go to the Advanced page and change the MTU setting from Automatic to Manual. Enter a value of between 1460 and 1500 in the Maximum Transmission Unit box. This should fix any connection issues you’re having.
2. Reset your router and modem:
This can help to clear up any connection problems you may be experiencing. To reset your router, simply press the reset button on the back of it for 10 seconds until all the lights turn off.
Then unplug the power cord from both your modem and router, wait 10 seconds, and plug them back in.
3. Open ports on your router:
You may need to open specific ports on your router so that the PS4 can communicate with other players’ consoles. To do this, log into your router’s settings page and look for the port forwarding or firewall settings.
From there, you can open the necessary ports.
4. Use a wired connection:
Try using a wired connection instead of a wireless one to reduce lag and improve your NAT type. This is because a wired connection offers faster and more reliable speeds than Wi-Fi.
These are just some of the solutions that you can try if you’re experiencing the PS4 Nat Type
Restart Your Router
The first fix is to restart your router. Turn the power off and then wait for a few minutes before turning it back on. This often resolves NAT type problems as it refreshes the network connection.
Change Settings in the Network Menu of PS4
Another common fix is to change the settings in the Network menu of PS4. Go into your network settings and check that all options, such as IP address, DNS server, MTU size, etc., are set correctly.
Set Up a Static IP Address
You may also need to set up a static IP address for your console if you haven’t done so already. This involves going into the network settings on your router and manually setting an IP address for your console.
It’s important to note that these steps vary from router to router, so you should refer to your router’s documentation for more detailed instructions.
How to check your PS4 IP address?
You can check the IP address of your PS4 console by going to Settings > Network > View Connection Status. This will show you your console’s local and internet IP addresses.
How to manually configure PS4 network settings?
If you need to manually configure your PS4 Network settings, go to Settings > Network > Set Up Internet Connection > Use a LAN Cable and select Custom. From there, you can enter in the necessary information such as IP address, DNS server, etc.
Enable UPnP for your router
If you have a router that supports UPnP (Universal Plug and Play), make sure it’s enabled. This can help to open the necessary ports for gaming connections on your network.
Read More: How to Fix a ThinkPad Keyboard is Not Working?
Make your PS4 the DMZ server
Another possible fix is to make your PS4 the DMZ (Demilitarized Zone) server. This allows all ports to be open so that you can connect to other players online. To do this, log into your router’s admin page and look for the DMZ settings. From there, you can enter the IP address of your PS4 console.
These are the methods you can try to fix the PS4 NAT type failed problem. If none of these solutions work, contact your Internet Service Provider (ISP) for further assistance. Good luck!
Forward Port for your PS4 network
If you are having trouble with your NAT type, you may need to forward ports on your router. This allows certain types of traffic to pass through the firewall and connect properly with other players online.
To do this, log into your router’s admin page and look for the port forwarding settings. From there, enter the necessary information such as port range, protocol and IP address.
Reboot your modem and router
If you’re still having trouble with your NAT type, try rebooting your modem and router. To do this, turn off the power switch on both devices for about 10 s until all the lights turn off.
Then unplug the power cord from the modem and router, wait a few seconds, and then plug it back in. Wait for all the lights to come back on before turning the power switch on again.
Check with your Internet Service Provider (ISP)
If none of these solutions work, contact your ISP for further assistance. They may be able to provide technical support to get your NAT type working properly.
Conclusion
If you’re having trouble with the NAT type failed issue on your PS4, don’t worry – there are fixes available! Try the methods outlined in this article to get your console back up and running properly.
From changing the network settings on your console to restarting the router, these fixes should help you resolve your NAT type failed issue quickly and easily. Good luck!